The VHQ´s are two channel high voltage supplies in 6U VME format, 164 mm deep, double width.
The units offers manual control and operation via VME bus.
The use of the VME interface supports more then the manual control functionality.
The high voltage supplies special provide high precision output voltage together with very low ripple and noise,even under full load.
Separate 10%-steps hardware switches put voltage and current limits.
An INHIBIT inputprotects connected sensitive devices.
Additionally, the maximal output current per channel is programmable via the interface.
The high voltage outputs protected against overload and short circuit.
The output polarity can be switched over.
The HV-GND is connected to the chassis and the powering GND.
- VME High Voltage power supplies in 2 slot width
- Output voltage 2kV to 5kV depending on model
- 1 channel and 2 channel versions in same dimensions
- LCD display for voltage or current
- Variable rate of change of output voltage
- Switchable polarity
- Integrated protection and control circuits
- Output overload and short circuit protected
- SHV connector on front side
- Full control via VMEbus