Produkter

 
 

Aktuellt

World´s first and only Handheld Real-Time Spectrum Analyzer! With this Spe...
Show news
You will now find the complete range of high quality Data Loggers from the ...
Show news
Pico Technology products now from Instrumentcenter! Pico has alway...
Show news
Se fler nyheter
 

Nyhetsbrev

Sign your e-mail address and receive our newsletter
 
 
HjemProgrammeringsenhederUniversalprogrammerareElnec BeeProg3 Ultra speed universal 64-pindrive programmer

Elnec BeeProg3 Ultra speed universal 64-pindrive programmer

Nyhed
Elnec BeeProg3 Ultra speed universal 64-pindrive programmer
 
Klik på billedet for at forstørre
 
 
 
 
 
 
 
 
 

BeeProg3 is next member of Elnec universal programmer series, built to meet the strong demand for an extremely fast and reliable programmer for high-capacity memories.
Designed with great emphasis on technical perfection and speed of hardware, this programmer perfectly fits for high-demanding desktop programming as well as for automated programming systems and ATE machines, where ensures the highest quality and overall yield.


BeeProg3 programmer core is based on a state of the art FPGA, powerful ARM processor and internal SSD to be ready to program devices at theoretically possible speeds. The achieved ultra fast programming speed - more than 22.5 MB/s sustainable - is actually higher, than can be utilized for most of real devices. This is reflected in extremely short programming times. For example, the 2 GB eMMC NAND Flash could be done in less than 100 sec - if programmed memory allow that speed.


Tests show, that the BeeProg3 is currently faster than all competitors in this price category (status: 10/2014), and for many chips is the fastest at all.
BeeProg3 supports all kinds of types and silicon technologies of today's and tomorrow's programmable devices. It partially supports also devices "from yesterday". You can be sure the next devices support will require the software update only, at the most (if necessary) simple programming module, therefore the costs of ownership is minimized. You have freedom to choose the optimal device for your design.


For the proper and reliable programming of ultra-fast memories the BeeProg3 utilizes specialized modules, optimally designed for specific device families, exactly according to the needs of programmed devices. But if it is possible, then universal programming modules, dedicated for IC package type, are used. The programming modules are identical for all programmers based on the BeeProg3 programming core (BeeHive304 for example).


Programming modules construction is designed for perfect stability at the top of the programmer, to be tough enough for insert/replace chips by mechanical arm and also allows to keep identical position of ZIF socket also after replacing of the module.
BeeProg3 isn't only a programmer, but also a tester of TTL/CMOS logic ICs and memories. Furthermore, it allows generation of user-definable test pattern sequences.


BeeProg3 interfaces with any IBM PC compatible personal computers, running MS Windows OS, through USB (2.0 HigSpeed) port or LAN port (100 Mb).


With its very competitive price together with excellent hardware design for reliable programming, it is probably the best "value for money" programmer in this class.

 

 

 

14 542 DKK

 
 
  • The BeeProg3 was designed meticulously with attention to details, quality and reliability
  • The programmer perfectly fits for high-demanding desktop programming, as well as for automated programming systems
  • Based on a state of the art FPGA design, powerful ARM processor and internal SSD, the BeeProg3 is ready to program devices at theoretically possible speeds
  • 64-pins rich-features, precise and powerful pindriver provides programming signals for every technology of programmable devices
  • Logic signals frequency up to 125MHz at 3.3V and 80MHz at 5V
  • It supports devices with VCC voltages as low as 0.8V
  • Ultra fast programming speed, one of the fastest programmers worldwide. Sustainable programming speed greater than 22.5 MBytes per second
  • The 2 GB eMMC NAND Flash could be done in less than 100 sec, if supported memory is fast enough
  • It utilizes both universal programming modules, dedicated for IC package type and specialized modules, designed optimized for specific device families
  • ESD protection on each pin of the pindriver
  • Dual connection to the PC: USB (2.0 HighSpeed) and LAN (100 Mbit)
  • Comfortable and easy to use control program, works with all versions of MS Windows from Windows XP to Windows 8.1 (32-bit and 64-bit)
  • unique quick reaction to customer's needs - software update can be ready within a day from request, by OnDemand software

Multiprogramming possible by attaching more programmers to one PC
developed and made in Slovakia
warranty - 3 years


 
 
 
 
 
Instrumentcenter Sweden AB, Box 233, 611 25 Nyköping - Sweden. | Tel: +46 155 26 70 30, Fax: +46 155 26 78 30.
Delivery address: Folkungavägen 4, 611 34 Nyköping, Sweden
E-post: info@instrumentcenter.se  International phone +46 155 26 70 30  Fax +46 155 26 78 30