Produkter

 
 

Aktuellt

World´s first and only Handheld Real-Time Spectrum Analyzer! With this Spe...
Show news
You will now find the complete range of high quality Data Loggers from the ...
Show news
Pico Technology products now from Instrumentcenter! Pico has alway...
Show news
Se fler nyheter
 

Nyhetsbrev

Sign your e-mail address and receive our newsletter
 
 
HjemBænkinstrumentModulinstrumentSRS SIM modulinstumentSRS SIM965 Bessel and Butterworth Filter Analog high-pass / low-pass filter

SRS SIM965 Bessel and Butterworth Filter Analog high-pass / low-pass filter

SRS SIM965 Bessel and Butterworth Filter Analog high-pass / low-pass filter
 
Klik på billedet for at forstørre
 
SRS SIM965 Bessel and Butterworth Filter Analog high-pass / low-pass filter
 
 
 
 
SRS SIM965 Bessel and Butterworth Filter Analog high-pass / low-pass filter
 
 
 
 

Specifications

 

Input
Impedance 1 MΩ
Coupling AC or DC
Gain
Max. input ±5 V

Filter
Filter Low-pass or high-pass
Tuneable freq. range 1 Hz to 500 kHz
Resolution 3-digit
Rolloff 12 dB/oct., 24 dB/oct.,

36 dB/oct., or 48 dB/oct.

Output
Noise <200 µVrms (1 MHz bandwidth)
THD 0.01 % (80 dB) at 1 kHz 

 

General
Operating temp. 0 °C to 40 °C, non-condensing

Interface Serial via SIM interface

Connectors BNC (2 front, 1 rear) DB15

(male) SIM interface

Power Power supplied by the SIM900

Mainframe, or optionally by a

user-supplied DC power supply

(±15 V and +5 V)

Dimensions  1.5" × 3.6" × 7.0" (WHL)
Weight 1.5 lbs.
Warranty One year parts and labor on

defects in materials and

workmanship 

 

 

 

Spørg om pris/offert

 




 

captcha

 
  • 1 Hz to 500 kHz
  • 3-digit cutoff frequency resolution
  • High-pass or low-pass operation
  • Selectable rolloff
  • Continuous time (not sampled)

The SIM965 Analog Filter is ideal for signal conditioning applications where Bessel or Butterworth filters are needed.

Bessel filters offer clean step response (negligible overshoot) and linear phase response, while Butterworth filters provide excellent pass-band flatness with some overshoot.

A choice of high-pass or low-pass filtering is selected from the front panel. Cutoff frequencies are set with 3-digit resolution, and a choice of 12, 24, 36 or 48 dB/octave rolloff is provided for either filter type.

 

The SIM965 accepts input signals between ±5 V, and has unity gain. Its low noise and low harmonic distortion, along with a bandwidth of greater than 1 MHz, make it ideal in sensitive analog applications.

If signal amplification is needed, the SIM910 JFET Preamplifier, or the SIM911 BJT Preamplifier should be considered.

 

Up to eight SIM965 modules can be housed in one SIM900 mainframe. Mainframes can be cascaded, allowing an unlimited number of filter channels for complex applications.

 

The SIM965 is also fully programmable. All functions can be controlled from a computer via the SIM900 Mainframe. Both RS-232 and GPIB interfaces are supported by the mainframe.

 


 
Ladda ner datablad »
 
 
 
 
Instrumentcenter Sweden AB, Box 233, 611 25 Nyköping - Sweden. | Tel: +46 155 26 70 30, Fax: +46 155 26 78 30.
Delivery address: Folkungavägen 4, 611 34 Nyköping, Sweden
E-post: info@instrumentcenter.se  International phone +46 155 26 70 30  Fax +46 155 26 78 30