Produkter

 
 

Aktuellt

Rigol introduces Mixed Signal Oscilloscope models among the popular DS1000Z...
Show news
Come and join the Evertiq TEC 2014 conference in Stockholm May 13 at the Ho...
Show news
Instrumentcenter AB and Aaronia AG in co-operation agreement! Aaronia AG i...
Show news
Se fler nyheter
 

Nyhetsbrev

Sign your e-mail address and receive our newsletter
 
 
HjemModul instrumentSRS SIM modulinstrumentSRS SIM960 Analog PID Controller 100kHz

SRS SIM960 Analog PID Controller 100kHz

SRS SIM960 Analog PID Controller 100kHz
 
Klik på billedet for at forstørre
 
SRS SIM960 Analog PID Controller 100kHz
 
 
 
 
SRS SIM960 Analog PID Controller 100kHz
 
 
 
 

Specifications 

 

Control type  Analog, PID + Offset
Input range ±10 V Common Mode, ±1 V Differential
Proportional gain  10-1 to 103
Integral gain 10-1 s-1 to 105 s-1 (effective time

constant 10-5 s to 10 s)
Derivative gain 10-7 s to 1 s
Offset  ±10 V, 1 mV resolution
Bandwidth  100 kHz
Propagation delay 1 µs (typ.)
Noise (typ) 8 nV/√Hz above 10 Hz (ref. to

input)
Parameter control Digital
Parameter accuracy 1 %
Stability  200 ppm/°C
Setpoint

External Front BNC input
Internal ±10 V range with 1 mV resolution
Internal setpoint noise 20 nV/√Hz above 100 Hz

Ramp Internal setpoint linear ramping

from 10-3 to 104 V/s

Amplifier output  ±10 V with adjustable upper/lower

limits
Display resolution 4 digits
Units s-1, s, V, V/s
Operating temp. 0 °C to 40 °C, non-condensing

Interface Serial via SIM interface
Connectors BNC (3 front, 2 rear)
DB15 (male) SIM interface
Power Power supplied by the SIM900

Mainframe, or optionally by a

user-supplied DC power supply

(±15 V and +5 V)

Dimensions 3.0" × 3.6" × 7.0" (WHL)
Weight 2.1 lbs.
Warranty One year parts and labor on defects

in materials and workmanship

 

 

 

Spørg om pris/offert

 




 

captcha

 
  • Analog signal path with digital control
  • 100 kHz bandwidth
  • Low-noise front end
  • P, I, D and Offset settable to 0.5 %
  • Anti-windup (fast saturation recovery)
  • Bumpless transfer, manual to PID
  • Analog setpoint with smooth ramping
  • Smooth upper/lower limit clamping

The SIM960 Analog PID Controller is a unique instrument intended for the most demanding control applications.

It combines analog signal handling with digital control, giving you the best of both worlds.

High-bandwidth (100 kHz) control loops may be implemented without discrete time or quantization artifacts. 

 

The low-noise front end brings better performance to noise sensitive applications including laser power and wavelength stabalization, cryogenics, scanning probe microscopy, and others.

User settable gain of up to 1000×means greater flexibility, reducing the need for input preamplification.

 

The unit can be used together with the SIM921 AC Resistance Bridge providing a flexible and cost-effective temperature control solution.

An internal ramp generator can control voltage slew rate between predefined start and stop setpoints.

The output is clamped within upper and lower user limits to guard against system overload. The conditional integration electronics provide anti-windup on the integrating capacitors, leading to faster recovery from saturation conditions. 

 

Front-panel control enables easy modification of system parameters and convenient monitoring of input and output signals. Power and serial communication are via a 15-pin D-sub connector which mates with the SIM900 mainframe.

All instrument parameters can be set and queried via the serial interface. 

 

The amplified error signal (P × ε) and the output may be monitored with an LED bar display or via the millivolt resolution numeric display. The Setpoint and Measure input signals can also be monitored on the numeric display. 

 


 
Ladda ner datablad »
 
 
 
 
Instrumentcenter Sweden AB, Box 233, 611 25 Nyköping - Sweden. | Tel: +46 155 26 70 30, Fax: +46 155 26 78 30.
Delivery address: Folkungavägen 4, 611 34 Nyköping, Sweden
E-post: info@instrumentcenter.se  International phone +46 155 26 70 30  Fax +46 155 26 78 30