HjemBænkinstrumentGeneratorerPuls/Delay generatorerSRS DB64 Coax Delay Box

SRS DB64 Coax Delay Box

SRS DB64 Coax Delay Box
 
Klik på billedet for at forstørre
 
SRS DB64 Coax Delay Box
 
 
 
 
 
 
 
 

The SRS Model DB64 Coax Delay Box provides switch-controlled delays from 0 to 63.5 ns with 0.5 ns resolution.

Applications include the timing of photomultiplier coincidences, set-up of time-to-amplitude converters, adjustment of signal phase, or any application which requires an adjustable, high-bandwidth analog delay.

 

The interchangeable inputs/outputs are on BNC connectors. Internally, the delay line segments consist of accurate lengths of RG58A/U coax cable with 50 Ω characteristic impedance.

DPDT switches are used to insert or remove delay segments. Careful component selection, mechanical design, and PCB layout ensure low reflections and low switch feed-through for high speed signals.

 

Two DB64s can be mounted side-by-side in a 19" rack using the RM1U rack mount accessory. A chassis lug is provided on the rear panel as a safety ground.

 


 

 

 

Spørg om pris/offert

 




 

captcha

 
  • Switch controlled time delays
  • 0 to 63.5 ns delay range
  • 0.5 ns resolution
  • Low reflections and feed-through

 
Ladda ner datablad »
 
 
 
 
Instrumentcenter Sweden AB, Box 233, 611 25 Nyköping - Sweden. | Tel: +46 155 26 70 30, Fax: +46 155 26 78 30.
Delivery address: Folkungavägen 4, 611 34 Nyköping, Sweden
E-post: info@instrumentcenter.se  International phone +46 155 26 70 30  Fax +46 155 26 78 30