Schlöder MGA 1030 Magnetic field generator and analyser DC - 250 kHz
Klik på billedet for at forstørre
The compact magnetic field generator and analyzer MGA 1030 allows susceptibility tests against magnetic fields from DC up to 250 kHz according the standard EN 55103-2 (product standard for professional audio, video and light control techniques) and there measurement according to EN 55103-1.
Construction The MGA 1030 contains three independent modules:
Signal generator DC - 250 kHz
Power amplifier max. 800 W
Spectrum analyzer 16 Bit
All three units can also be used as "stand-alone" devices
Full automatic testing In combination with a Triax-Helmholtz coil can be tested EUT in 3 axis without rotating the EUT. Magnetic field strenghts up to 1000 A/m at frequencies from DC to 1 kHz are possible. Smaller field strenghts can be achieved up to 250 kHz
Calibration of a Helmholtz coil In combination with a loop sensor (RLS 133 or LS 133), the Helmholtz coil can be calibrated. It can also custom coils are used. A calibration routine in the software of the MGA 1030 allowed linking of additional test agents.
Self-calibration Using an ultra-stable voltage source self-calibration correction values are stored in an internal EEPROM. Any voltage signal or voltage measurement device is calibrated as a self-calibration process automatically in about a minute.
Spørg om pris/offert
EN 55103-1 + 2, EN 61000-4-8, Automotive, MIL-STD a.o.
Generation and measurement of magnetic fields from DC up to 250 kHz
Field strengths up to 1000 A/m
Additional – Sensor coils, Helmholtz coils, Test adapter