Produkter

 
 

Aktuellt

World´s first and only Handheld Real-Time Spectrum Analyzer! With this Spe...
Show news
You will now find the complete range of high quality Data Loggers from the ...
Show news
Pico Technology products now from Instrumentcenter! Pico has alway...
Show news
Se fler nyheter
 

Nyhetsbrev

Sign your e-mail address and receive our newsletter
 
 
HjemStrømforsyningerForstærkereToellner TOE 7610. 4-quadrant amplifiers DC to 100 kHz 150 W source and sink power

Toellner TOE 7610. 4-quadrant amplifiers DC to 100 kHz 150 W source and sink power

Toellner TOE 7610.  4-quadrant amplifiers DC to 100 kHz 150 W source and sink power
 
Klik på billedet for at forstørre
 
 
 
 
 
 
 
 
 

Power supplies for laboratory use are mostly only power sources.

They are only able to deliver power with one single polarity, i.e. these instruments only work in one quadrant of the output voltage/ current diagram.

Common amplifiers deliver voltages with both priorities, but are generally unable to absorb power values in a range comparable to that which they are able to deliver. They therefore mainly work as two-quadrant devices.

 

The TOE 7610 series of four-quadrant amplifiers is able to work as a power sink as well as a power source with equal values of delivered or absorbed power.

The TOE 7610 series is thus a voltage amplifier, bipolar voltage and current source, and current sink in one instrument.

Having to combine different instruments, where problems frequently occur with the coordination of individual components and the tendency to oscillate, now belongs to the past.

 

 

 

19 915 DKK

 
 
  • 150 W source and sink power
  • Output: up to ± 60 V, up to ± 15 A
  • True four-quadrant operation
  • Power bandwidth > 100 kHz
  • Gain x 1 up to x 12
  • DC offset up to ± Vmax, full variable
  • Positive and negative current limitation separately adjustable
  • Total harmonic distortion < 0,1%
  • Input impedance 50 W / 100 kW
  • Brief load current 3 x Irated-
  • Analog control input 0 to 5 V or0 to 10 V
  • ½ 19" width, 3 HUparallel installation possible
  • Slew (rise) rate approx. 6 V/μs to25 V/μs (depends on model)
  • Sensing
  • Output at front, optional at rear
  • Optimally suitable for electrical noise testing of components against vehicle electrics ripple


 
Ladda ner datablad »
 
 
Ladda ner extra dokument »
 
 
Instrumentcenter Sweden AB, Box 233, 611 25 Nyköping - Sweden. | Tel: +46 155 26 70 30, Fax: +46 155 26 78 30.
Delivery address: Folkungavägen 4, 611 34 Nyköping, Sweden
E-post: info@instrumentcenter.se  International phone +46 155 26 70 30  Fax +46 155 26 78 30