HjemBænkinstrumentKalibratorer og NormalerEl (Spänning/ström/effekt)Time Electronics 5018 Programmerbar AC/DC Spänning-Ström Kalibrator

Time Electronics 5018 Programmerbar AC/DC Spänning-Ström Kalibrator

Time Electronics 5018 Programmerbar AC/DC Spänning-Ström Kalibrator
 
Klik på billedet for at forstørre
 
 
 
 
 
 
 
 
 

Better than 15ppm/year Accuracy
The outstanding accuracy and stability of the 5018 programmable calibrator is achieved by the use of patented circuit which incorporates a dedicated micro-processor to continually monitor the state of a bank of precision voltage references.

 

The basic digital to analogue converter has 22 bit (0.25ppm) resolution and linearity and temperature coefficient are compensated in software to better than 0.1ppm of full scale per degC. For the DC 2V and 20V ranges noise is <1ppm (<1Hz) and short term stability <0.5ppm/day and <2ppm/month.

Display
Eight bright 7 segment LEDs are used to display the output value while a bank of dot matrix LEDs show units and other information.

GPIB & RS232
These interfaces allow the 5018 to be connected to a PC and controlled by an external program such as Time Electronics EasyCal calibration software.


 

 

 

Spørg om pris/offert

 




 

captcha

 
  • 15ppm accuracy/0.5ppm resolution
  • 1999999 full scale + 10% over-range
  • 20mV-200mV-2V-20V DC voltage
  • Deviation control -9.999% to +9.999%
  • GPIB & RS232 interface
  • Ideal for ATE application

Options:

  • 20uA-200uA-2mA-20mA-200mA DC
  • AC Voltage and Current
  • 200V and 1050V DC/AC range
  • EasyCal control software
  • Traceable Calibration Certifications
  • 19" Rack Mount Kit

 
Ladda ner datablad »
 
 
 
 
Instrumentcenter Sweden AB, Box 233, 611 25 Nyköping - Sweden. | Tel: +46 155 26 70 30, Fax: +46 155 26 78 30.
Delivery address: Folkungavägen 4, 611 34 Nyköping, Sweden
E-post: info@instrumentcenter.se  International phone +46 155 26 70 30  Fax +46 155 26 78 30