Meilhaus ME-8200 and MEphisto Opto digital board, high-drive opto-isolated and TTL
Klik på billedet for at forstørre
8 or 16 opto inputs and 8 or 16 opto outputs.
Level up to 32 V (option: up to 50 V). Isolation up to 500 V.
Outputs source, option "-S": Sink.
Load up to 700 mA.
Inputs with overvoltage protection/transient diode. Short circuit proof.
Can be used for monitoring status changes.
Bitpattern comparator, 8 bit or 16 bit (interrupt on comparison positive).
Interrupt on thermic load.
Any input selectable as interrupt source via the mask register.
(Interrupt functionality not available for MEphisto Opto).
16 additional TTL digital-I/O lines (2x 8 bit ports), expandable with relays/optoisolation.
Plug&Play. Available for the bus platforms StandardPCI and CompactPCI/PXI (PCI Local Bus 2.1 compatible), PCI-Express and with ME-Synapse: Ethernet/LAN, USB.
"Native" USB version MEphisto Opto: USB 1.1 full-speed. Robust metal housing. External power supply. (Note: At the moment MEphisto Opto (USB) not with ME-iDS under Linux and not with Windows 64 bit)
Spørg om pris/offert
Opto-isolated channels up to 32 V (optional up to 50 V). Load 700 mA.
Bit-pattern comparison and status check with interrupt
Also available as "native" USB version MEphisto Opto.
Does your application require opto-isolated digital channels with a higher level than the regular 24 V?
Then this is the right board for you: Depending on the model you can make use of 8or 16 opto-isolated inputs and outputs as well as 16 additional standard TTL digital channels. All outputs are stable during PC power on/off.
Moreover, the board has some interesting and versatile interrupt functions...