Produkter

 
 

Aktuellt

World´s first and only Handheld Real-Time Spectrum Analyzer! With this Spe...
Show news
You will now find the complete range of high quality Data Loggers from the ...
Show news
Pico Technology products now from Instrumentcenter! Pico has alway...
Show news
Se fler nyheter
 

Nyhetsbrev

Sign your e-mail address and receive our newsletter
 
 
HjemAC CurrentClamp TypePEM RCTi AC Current transducers for permanent installation and 5.0Vrms output, 250Arms to 50kArms

PEM RCTi AC Current transducers for permanent installation and 5.0Vrms output, 250Arms to 50kArms

PEM RCTi AC Current transducers for permanent installation and 5.0Vrms output, 250Arms to 50kArms
 
Klik på billedet for at forstørre
 
 
 
 
 
 
 
 
 

Specifikationer:

 

Rated current (rms): 250Arms to 50kArms

Rated output (Full scale FS): 5.0Vrms (± 7.07V peak)

Output limit: 150% FS (± 10.6V peak)

Supply voltage (wide input): 12Vdc (-10%) to 24Vdc (+20%)

Maximum input power: 0.4W

Operating temperature range: -5℃ to +65℃ (Integrator electronics), -20℃ to +80℃ (Coil and cable)

Bandwidth (-3dB): (<2000A) 0.6Hz to 1MHz (300mm) 600kHz (700mm)

(>2000A) 0.2Hz to 1MHz (300mm) 600kHz (700mm)

Phase shift @50Hz: (<2000A): 0.9±0.1 degrees

(>2000A): 0.4±0.1 degrees

Accuracy (typ.): ±1.0% of reading

Output load: > 10.0 k ohm

Coil Length: 300mm, 500mm or 700mm (Custom lengths available)

Cable Length (coil to integrator): 1m or 2.5m (Custom lengths available)

 

Standards and Approvals

  • CE marked
  • Complies with EMC EN 61326-1 2006
  • Complies with IEC61010-1:2001 

 

 

 

 

Spørg om pris/offert

 




 

captcha

 

The RCTi is a current transducer for permanent installation.

Simple to install and easy to retrofit, the Rogowski (sense) coil is thin, lightweight, flexible and clip-around.

 

The secondary output from the transducer is an instantaneous voltage proportional to the measured primary current providing an accurate, low cost, wide-band measurement of the primary current.

 

The RCTi is typically used with power and harmonic meters and analyzers, digital multi-meters, oscilloscopes, data-loggers and data acquisition cards.

  • Traceable calibration (certificate included)
  • No magnetic materials means excellent linearity < 0.1% reading
  • Fully isolated measurement◦Isolated power supply 2kVdc
  • Coil rated at 2kVpeak (withstand test is 4kVrms / 50Hz / 60 sec)
  • Small DIN rail (or panel mount) enclosure - UL94V-0 rated 

 

 


 
Ladda ner datablad »
 
Ladda ner manual »
 
Ladda ner extra dokument »
 
 
Instrumentcenter Sweden AB, Box 233, 611 25 Nyköping - Sweden. | Tel: +46 155 26 70 30, Fax: +46 155 26 78 30.
Delivery address: Folkungavägen 4, 611 34 Nyköping, Sweden
E-post: info@instrumentcenter.se  International phone +46 155 26 70 30  Fax +46 155 26 78 30