Produkter

 
 

Aktuellt

World´s first and only Handheld Real-Time Spectrum Analyzer! With this Spe...
Show news
You will now find the complete range of high quality Data Loggers from the ...
Show news
Pico Technology products now from Instrumentcenter! Pico has alway...
Show news
Se fler nyheter
 

Nyhetsbrev

Sign your e-mail address and receive our newsletter
 
 
HjemFast monteret instrumentAC/DC Power SupplyELC ALE1502D 60 Watts Balanced multiple power supply ±10 to ±15V

ELC ALE1502D 60 Watts Balanced multiple power supply ±10 to ±15V

Nyhed
ELC ALE1502D 60 Watts Balanced multiple power supply ±10 to ±15V
 
Klik på billedet for at forstørre
 
 
 
 
 
 
 
 
 

Other specifications


• Safety : Class II, Safety Extra Low Voltage (SELV), complies with EN 60950.
EMC : Complies with EN 61000-6-2 and EN 61000-6-4.
• Protection level : IP 30.
• Operating temperature : from -25 to +60°C ; derating : 1W/°C from +40°C
• Input voltage : 190 to 264 Volts, 50 / 60 Hz.
• Mains input : spring terminal block with levers for 2,5 mm² (AWG 12) wires.

• Power consumption : 78W max.
• Dielectric strength : 3000V from input to output.
• Presentation : modular polycarbonate case (6 x 17.5mm) screenprinted.
• Mounting : Clips package integrated in modular case for DIN rails profile 35x7,5mm or 35x15mm. Removable wall mouting integrated to the case for 4mm screws.

 

 

 

1 458 DKK

 
 
  • PRECISE : Switching power supply offering a ripple <3mV rms.
  • Output voltage adjustable from ±10 to ±15V
  • SMALL : Modular, DIN rail mounting
  • PROTECTED : against short circuits and reverse
  • polarity.
  • RESISTANT TO SHOCK

• Floating outputs on spring terminal block with levers for 2,5mm² (AWG 12) wires.

• Balanced-output voltage adjustable from ±10 to ±15V+15 V output
• Regulation : < 20mV for a load change from 0 to 100%.< 2mV for a line change from 190 to 264V.
• Ripple : < 3mV rms including :
< 3mV peak to peak of the signal at 100KHz
< 5mV peak to peak of the signal at 100Hz
< 12mV peak to peak of switching spikes -15 V output

• Regulation : < 20mV for a load change from 0 to 100%. < 2mV for a line change from 190 to 264V.

• Ripple : < 3mV rms including :

< 4mV peak to peak of the signal at 330KHz< 4mV peak to peak of the signal at 100Hz
< 15 mV peak to peak of switching spikes
24V Output (Adjustable from 20 to 30V) Available between output + and -

•Regulation : < 35mV for a load change from 0 to 100%
< 10mV for a line change from 190 to 264V
•Ondulation : < 3mV rms including:
< 8mV peak to peak of the switching signal
< 5mV peak to peak of the signal at 100Hz
< 15mV peak to peak of switching spikes.

 

Indicators
• Green power-on LED indicator.
• Overheat or overcurrent red LED "status" indicator

 

Current +15 V (alone)

• I max : 5,5A in short circuit condition 5A from 10 to 12V ; 4A at 15V

Current -15 V (alone)

• I max : 2,1A in short-circuit condition 2 A from 10 to 15 VCurrent 24V (Adjustable from 20 to 30V) I max: 2,1A in short-circuit condition 2A from 20 to 30 V

 

Power
• Max output power : 60W.
• I max ±15V : 2A

 

Protections
• Against short-circuits by current regulation.
• Against overcurrent on primary circuit by fuse.
• Against overtemperature, by thermal shutdown.


 
Ladda ner datablad »
 
 
 
 
Instrumentcenter Sweden AB, Box 233, 611 25 Nyköping - Sweden. | Tel: +46 155 26 70 30, Fax: +46 155 26 78 30.
Delivery address: Folkungavägen 4, 611 34 Nyköping, Sweden
E-post: info@instrumentcenter.se  International phone +46 155 26 70 30  Fax +46 155 26 78 30