Multi M-140HC AC Current/Leakage with Hi-Voltage Phase Current Detection
Klik på billedet for at forstørre
The Latest CT Technologies
By checking load or no-load at the time of releasing disconnector, technical field workers can confirm the final safety condition by themselves.
Hi-Voltage CV Shield Cable - developed the technology enables to measure load current by clamping CT to three cables in a lump.
Hi-Voltage CVT Shield Cable- developed the technology enables to measure load Current by inserting CT head to the cable
2 223 DKK
Easy!:Measurale Load Current at high voltage CV/CVT cables with grounding lines for shield phase.
Epoch-Making!:Can measure phase current of CVT cable just by putting CT head on to the conductors as well as CV cable just by clamping CT to the conductors in a lump.
Low Cost!:Can measure line/leakage current in the same manner as ordinary clamp meters.
In the annual inspection for power receiving equipment, each test is done after released the disconnector and in the condition of power off but it is very dangerous to release the disconnector under the loading on condition, as it might have caused arc.
There are some equipment without pilot lamp, etc. showing no loading condition and are many fields where the final safety confirmation cannot be done with your own eyes.
Model M-140HC has been developed for security of technicians under such circumstances and can measure loading current at the grounding side of high voltage cable with grounding line for shielding phase.
Also, this model can measure load/leakage current in the same manner as ordinary clamp meters and can be used widely in various measuring fields.